ComAp Model Suite - PowerFactory

Order code: SW1CMSPFXXX

ComAp Model Suite is a set of simulation model blocks for DIgSILENT PowerFactory that represent the control behaviour of ComAp control units. The blocks reproduce the core control algorithms of ComAp controller firmware and are used for grid code compliance studies, islanded topology studies and recertification. They are delivered as compiled, encrypted blocks – ready for immediate use. 
  • Ready-to-use PowerFactory blocks
  • Real controller behaviour
  •  Grid code functions and grid protections
  • Complete control system architecture
  • Pre-configured templates
  • Works with your source models

Compliance with international grid codes: Certified against the VDE AR-N 4110. The models are designed to be broadly applicable and are compatible with other standards, including IEEE 1547-2018, EREC G99 (UK) and national implementations of EU Regulation 2016/631 (RfG). 

    ComAp Model Suite - PowerFactory

ComAp Model Suite brings the behaviour of ComAp controllers into your PowerFactory power system studies. Its model blocks replicate the controllers’ control algorithms, so you can run RMS simulations of ComAp-controlled plants without building the control logic yourself. Developed mainly for grid code compliance verification, it also supports grid integration studies, stability analysis, and controller design and tuning.Only the algorithms that determine how a unit behaves in the electrical network are modelled. The configuration interface, communication options, custom PLC logic and the power source itself (generator, battery or PV inverter) are not included.


ComAp Model Suite - PowerFactory offers: 

  • Ready-to-use black-box blocks for DIgSILENT PowerFactory, compiled and encrypted – no need to build or maintain the control logic yourself   
  • Firmware-faithful behaviour – internal controller algorithms converted into hierarchical, time-clocked block diagrams (implemented in Modelica) that replicate the time-driven execution of the real firmware 
  • PGS – Power Generation System block representing the grid-side logic: measurement of grid frequency, voltage and power, grid protections, grid code functions and active/reactive power setpoints for the units (corresponds to InteliMains 1010)
  • PGU – Power Generation Unit block representing the source-side logic: source protections and active power (speed/frequency) and reactive power (voltage) control loops (corresponds to InteliGen 1000, InteliSys 2000, InteliNeo 6000 and InteliNeo 5500)  
  • ICC – InterController Communication block replicating the data exchange between controllers over CAN bus, so that multi-controller systems behave as one coordinated system 
  • Support for MINT and SPtM/MPtM topologies – either one or multiple gen-sets/source (e.g. a CHP unit or a battery storage system)
  • Pre-configured examples SMIB (Single Machine Infinite Bus), MMIB (Mlutiple Machine Infinite Bus)
  • Grid protection functions – over/under frequency, over/under voltage and Loss of Mains / RoCoF
  • Grid code functions – frequency response, voltage ride-through and reactive power control modes
  • Grid-forming and grid-following sources – control outputs for the governor and exciter of synchronous generators, or P/Q references for inverter-based sources such as PV and BESS
  • Straightforward configuration – connects to standard PowerFactory measurement elements and is parameterised through a set of exposed setpoints   


Related products:

Certifications and standards:

  • VDE-AR-N 4110:2023-09
  • CORR 1:2024-11 FGW TG8 Rev 10
  • TG3 Rev 26 + Suppl 1
  • TG4 Rev 10

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .